Gigabyte GA-Z87X-UD5H - Teaming

Unique Features
- 102 -
5-3 Teaming
Dual LAN with Teaming functionality enabled allows two single connections to act as one single connection for twice
the transmission bandwidth, making data transmission more effective and also improving the quality of transmission
ofdistantimage(s).FaulttoleranceonthedualLANnetworkpreventsnetworkdowntimebytransferringtheworkload
from a failed port to a working port.
Step 3:
Enter the team name.
Step 4:
Select two adapters to include in the team and click
Next.
Step 5:
Select a team type and click Next. You can read the
detailed explanation of each team type below. On
the following dialog box, click Finish to complete the
teamingconguration.
Step 1:
After installing the motheboard and LAN drivers, restart
your computer and then open Device Manager. Right-click
on the network adapter for teaming and select Properties
under Network adapters.
Step 2:
Click the Teaming tab, select the Team this adapter
with other adapters checkbox, and click New Team.
Step 6:
You can see the new team under Network adapters.
(Note:Todeletetheteam,right-clickontheteamand
select Properties\Settings\Remove Team.)
• Before teaming, make sure the LAN2 port is connected to a network.
• The speed of transmission is subject to the actual network environment or status even with Teaming enabled.
• ToenableTeamingorBonding(IEEE802.3adLinkAggregation)feature,itisrequiredthattheconnectednet-
work switch or router device supports the IEEE 802.3ad LACP standard. Please refer to your network switch
or router device manual for further details.