Need help?Do you have a question about the Gigabyte GC-WB867D-I and is the answer not in the manual?
General| Interface | WLAN / Bluetooth |
|---|---|
| PCI Card form factor | Half-height |
| Connectivity technology | Wireless |
| Chipset | - |
| Internal | Yes |
| Certification | UL, C-UL, CB |
| Component for | PC |
| Product color | Aluminium, Green |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Bluetooth version | 4.0 |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| Security algorithms | EAP-FAST, EAP-TLS, LEAP, PEAP, WEP, WPA, WPA2, WPS |
| Networking standards | IEEE 802.11w, IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n |
| Maximum data transfer rate | 867 Mbit/s |
| Quantity | 1 |
Install the Wi-Fi/Bluetooth card in a PCI Express x1 slot and connect the USB cable.
Connect the other end of the USB cable to the motherboard's F_USB connector.
Securely connect the antenna cables to the Wi-Fi/Bluetooth card's antenna connectors.
Move the antennas to a location with good signal reception after installation.
Specifies indoor usage only for the 5.15-5.25GHz band to reduce interference.
Product complies with FCC portable RF exposure limits for uncontrolled environments.
Warns against unauthorized modifications and antenna use, and potential voiding of authority.
5150-5250 MHz band is for indoor use only to reduce potential interference.
Product complies with Canada portable RF exposure limits for uncontrolled environments.
Product conforms to EMC, LVD, R&TTE, and RoHS directives for European compliance.
Product conforms to FCC Part 15, Subpart B, Section 15.107(a) and 15.109(a) Class B.
To Next Page
