Need help?Do you have a question about the Gigabyte GC-WBAX1200 and is the answer not in the manual?
General| Interface | WLAN / Bluetooth |
|---|---|
| Connectivity technology | Wireless |
| Bluetooth | Yes |
| Wi-Fi band | Tri-band (2.4 GHz / 5 GHz / 6 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Bluetooth version | 5.2 |
| Top Wi-Fi standard | Wi-Fi 6E (802.11ax) |
| Security algorithms | WPA3 |
| Networking standards | IEEE 802.11ac |
| Maximum data transfer rate | 1200 Mbit/s |
| Component for | PC |
| Harmonized System (HS) code | 85176990 |
Install the Wi-Fi/Bluetooth card in a PCI Express x1 slot and connect the USB cable.
Connect the other end of the USB cable to the F_USB connector on the motherboard.
Tighten the antenna cables to the antenna connectors on the Wi-Fi/Bluetooth card.
Move the antennas to a place where the signal is good after installation.
Provides compliance information as per 47 CFR § 2.1077.
States compliance with FCC Rules, Part 15, Subpart B for unintentional radiators.
Confirms digital apparatus does not exceed Class B limits for radio noise emissions.
States compliance with EU directives: EMC, Low-voltage, and RoHS.
Explains WEEE symbol and guidelines for product disposal and recycling.
Confirms compliance with Radio Equipment Directive 2014/53/EU for member states.
Mandates for low-power radio frequency devices in Taiwan.
Restricts 5.25GHz-5.35GHz band wireless devices to indoor use only.
Restricts 5.15GHz-5.35GHz band wireless devices to indoor use only.
Lists country-specific approvals and certifications for the wireless module.
Table detailing the presence of restricted substances in product components per Chinese regulations.
To Next Page