Gigabyte GSmart S1200 - Safety Information; RF Exposure and Safety Data; Operational Safety Precautions

3
1. Introduction
S1200 Upgrade Tools are for upgrading the firmware of S1200.
2. Installation
Execute setup.exe for installing S1200 USB driver, and the new firmware of
S1200. The steps are below:
a. Execute setup.exe
If the operating system of your computer is Windows XP, follow the steps
below. Start your device, and switch the screen to Windows Operating System.
Then start ActiveSync via the USB cable.
If the operating system of your computer is Windows Vista, follow the steps
below. Start your device, and switch the screen to Windows Operating System.
Then start Windows Mobile Device Center via the USB cable.
Make sure that
ActiveSync is
connected