Gigabyte H261-H60 - Ipv6 BMC Network Configuration

BIOS Setup - 100 -
5-4-4 IPv6BMCNetworkConguration
IPv6 BMC Lan Channel 1
IPv6 BMC Lan Option
Enable/Disable IPv6 BMC LAN channel function. When this item is disabled, the system will not modify
any BMC network during BIOS phase.
Options available: Enable/Disable. Default setting is Enable.
IPv6 BMC Lan IP Address Source
Select to congure LAN channel parameters statically or dynamically (by BIOS or BMC).
Options available: Unspecied/Static/Dynamic-Obtained by BMC running DHCP.
Default setting is Dynamic-Obtained by BMC running DHCP.
 IPv6BMCLanIPAddress/PrexLength->[1999::11/64]
Check if the IPv6 BMC LAN IP address matches those displayed on the screen.