Gigabyte H370N WIFI - Connector and Interface Specifications

Storage Interface  Chipset:
- 4 x SATA 6Gb/s connectors
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
 Intel
®
Optane
™
Memory Ready
USB  Chipset:
- 1 x USB Type-C
™
port on the back panel, with USB 3.1 Gen 1 support
- 6 x USB 3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
- 2 x USB 2.0/1.1 ports available through the internal USB header
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 8-pin ATX 12V power connector
 2 x M.2 Socket 3 connectors
 4 x SATA 6Gb/s connectors
 1 x CPU fan header
 2 x system fan headers
 1 x digital LED strip header
 1 x digital LED strip power select jumper
 1 x RGB (RGBW) LED strip header
 1 x front panel header
 1 x front panel audio header
 1 x USB 3.1 Gen 1 header
 1 x USB 2.0/1.1 header
 1 x S/PDIF Out header
 1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC-TPM2.0_S
module only)
 1 x speaker header
 1 x Clear CMOS jumper
 1 x chassis intrusion header
Back Panel
Connectors
 1 x DisplayPort
 2 x HDMI ports
 1 x USB Type-C
™
port, with USB 3.1 Gen 1 support
 4 x USB 3.1 Gen 1 ports
 2 x RJ-45 ports
 2 x SMA antenna connectors (2T2R)
 3 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip
Hardware
Monitor
 Voltage detection
 Temperature detection
 Fan speed detection
 Overheating warning
 Fan fail warning
 Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.
BIOS  2 x 128 Mbit ash
 Use of licensed AMI UEFI BIOS
 Support for DualBIOS
™
 PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
- 8 -