Gigabyte H470I AORUS PRO AX - Page 8

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2260/2280 SATA and PCIe x4/x2 SSD
support) (M2P_SB)
 1 x M.2 connector on the back of the motherboard (Socket 3, M key, type 2260/2280
PCIe x4/x2 SSD support) (M2Q_SB)
 4 x SATA 6Gb/s connectors
 Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 and SATA
connectors.
 Intel
®
Optane
™
Memory Ready
USB  Chipset:
- 1 x USB Type-C
™
port on the back panel, with USB 3.2 Gen 1 support
- 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
- 2 x USB 2.0/1.1 ports available through the internal USB header
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 8-pin ATX 12V power connector
 1 x CPU fan header
 2 x system fan headers
 1 x addressable LED strip header
 1 x RGB LED strip header
 4 x SATA 6Gb/s connectors
 2 x M.2 Socket 3 connectors
 1 x front panel header
 1 x front panel audio header
 1 x speaker header
 1 x USB 3.2 Gen 1 header
 1 x USB 2.0/1.1 header
 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0 module only)
 1 x Clear CMOS jumper
 1 x chassis intrusion header
 1 x Q-Flash Plus button
Back Panel
Connectors
 1 x DisplayPort
 2 x HDMI ports
 1 x USB Type-C
™
port, with USB 3.2 Gen 1 support
 4 x USB 3.2 Gen 1 ports
 2 x RJ-45 ports
 2 x SMA antenna connectors (2T2R)
 3 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip
- 8 -