Gigabyte H470M K - Page 8

- 8 -
Storage Interface  Chipset:
- 1 x M.2 connector:
Socket 3, M key, type 2280 PCIe 3.0 x4/x2 SSD j
Socket 3, M key, type 2280 SATA and PCIe 3.0 x4/x2 SSD k
- 2 x SATA 6Gb/s connectors
 Support for RAID 0, RAID 1, and RAID 5 k
 Intel
®
Optane
™
Memory Ready k
USB  Chipset:
- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
Internal
Connectors
 1 x 24-pin ATX main power connector
 1 x 8-pin ATX 12V power connector
 1 x CPU fan header
 1 x system fan header
 1 x RGB LED strip header
 1 x M.2 Socket 3 connector
 2 x SATA 6Gb/s connectors
 1 x front panel header
 1 x front panel audio header
 1 x USB 3.2 Gen 1 header
 1 x USB 2.0/1.1 header
 1 x serial port header
 1 x Clear CMOS jumper
Back Panel
Connectors
 1 x HDMI 1.4 port
 2 x USB 3.2 Gen 1 ports
 4 x USB 2.0/1.1 ports
 1 x RJ-45 port
 3 x audio jacks
I/O Controller  iTE
®
I/O Controller Chip
Hardware
Monitor
 Voltage detection
 Temperature detection
 Fan speed detection
 Fan fail warning
 Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you
install.
BIOS  1 x 128 Mbit ash
 Use of licensed AMI UEFI BIOS
 PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
j Only for H510M K.
k Only for H470M K.