Gigabyte MVBAYAI - Save & Exit Menu

BIOS Setup - 52 -
2-6 Save & Exit Menu
The Exit menu displays the various options to quit from the BIOS setup. Highlight any of the exit options then
press Enter.
Save Changes and Reset
Saves changes made and close the BIOS setup.
Options available: Yes/No.
Discard Changes and Reset
Discards changes made and close the BIOS setup.
Options available: Yes/No.
Restore Defaults
Loads the default settings for all BIOS setup parameters. Setup Defaults are quite demanding in terms
of resources consumption. If you are using low-speed memory chips or other kinds of low-performance
components and you choose to load these settings, the system might not function properly.
Options available: Yes/No.
Boot Override
 PressEntertocongurethedeviceastheboot-updrive.
UEFI: Built-in in EFI Shell
 Press<Enter>onthisitemtoLaunchEFIShellfromlesystemdevice.