Gigabyte R152-P31 - Page 52

BIOS Setup - 52 -
Parameter Description
PCI Express GEN1 Setting
PCI Express GEN1 Device Register Settings

Relaxed Ordering
– Enable or disable PCI Express Device Relaxed Ordering.
Options available: Enabled/Disabled. Default setting is Enabled.

Extend Tag
– If enabled, allows device to use 8-bit Tag eld as a
requester.
Options available: Enabled/Disabled. Default setting is Disabled.

No Snoop
– Enable or disable PCI Express Device No Snoop option.
Options available: Enabled/Disabled. Default setting is Disabled.

Maximum Payload
– Set Maximum Payload of PCI Express Device or allow
System BIOS to select the value.
Options available: Auto/128 Bytes/ 256 Bytes. Default setting is
Auto.
5-2-5-1 PCI Express GEN 1 Settings