Gigabyte R152-Z30 - Page 13

- 13 - Hardware Installation
Socket
Socket
Front Panel
LED/Buttons
(R152-Z30)
 2 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x NMI button
 1 x Reset button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
(R152-Z31)
(R152-Z32)
 1 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x NMI button
 1 x Reset button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
Socket
Socket
Rear Panel I/O  3 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
Socket
Socket
Backplane I/O
(R152-Z30)
 SATA(6Gb/s)
(R152-Z31)
(R152-Z32)
 SAS(12Gb/s) / SATA(6Gb/s)/ NVMe(8Gb/s)
Socket
Socket
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010
Socket
Socket
System
Management
 Aspeed® AST2500 management controller
 Avocent® MergePoint IPMI 2.0 web interface:
 Network settings
 Network security settings
 Hardware information
 Users control
 Services settings
 IPMI settings
 Sessions control
 LDAP settings
 Power control
 Fan proles
 Voltages, fans and temperatures monitoring
 System event log
 Events management (platform events, trap settings, email settings)
 Serial Over LAN
 vKVM & vMedia (HTML5)