Gigabyte R180-F34 - Boot Menu Configuration

- 112 - BIOS Setup
5-6 Boot Menu
The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error
message if the legacy drive(s) specied is not bootable.
Boot Conguration
Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535(0xFFFF) means indenite waiting."
Press the numberic keys to input the desired value.
Bootup NumLock State
Enable or Disable Bootup NumLock function.
Options available: On/Off. Default setting is On.
Quiet Boot
Enables or disables showing the logo during POST.
Options available: Enabled/Disabled. Default setting is Enabled.
Boot Option Priorities
Boot Option #1/#2/#3#4
Press Enter to congure the boot priority.
By default, the server searches for boot devices in the following secquence:
1. UEFI device.
2. Hard drive.
3. Network device.
4. USB device