Gigabyte R180-F34 - Jumper Setting

- 38 -
Hardware Installation
4-2 Jumper Setting
No. Jumper Code Jumper Setting
1.
CLR_CMOS
(Clearing CMOS Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: Clear CMOS data
2.
S3_MASK (S3 Power
On Select Jumper)
1-2 Close: Stop an initial power on when BMC is not ready.
2-3 Close: Keep initial power on. (Default setting)
3.
ME_UPDATE
(ME Update Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: ME recovery mode.
4.
PCH_ME
(ME Recovery Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: ME recovery mode.
5.
BIOS_PWD
(Clearing Supervisor
Password Jumper)
1-2 Close: Normal operation. (Default setting)
2-3 Close: Skip supervisor password.
6.
BIOS_RCVR
(BIOS Recovery Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: BIOS recovery mode.
7.
BMC_FRB
(Force to Stop FRB
Timer Jumper)
1-2 Close: Normal operation (Default setting)
2-3 Close: Force to Stop FRB Timer
1
2
34
5
6
7