Gigabyte R182-N20 - Page 13

- 13 - Hardware Installation
Socket
Socket
Security
Security
Expansion Slot Riser Card CRS101E:
 1 x PCIe x16 slot (Gen4 x16), Full-height half-length
Riser Card CRS101G:
 1 x PCIe x16 slot (Gen4 x16), Full-height half-lengthh
1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth from CPU_0
 Supported NCSI function
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x8 bandwidth from CPU_1
 Supported NCSI function
Socket
Socket
Security
Security
Internal I/O  2 x SATA 7-pin connectors
 2 x CPU fan headers
 1 x USB 3.0 header
 1 x TPM header
 1 x VROC connector
 1 x Front panel header
 1 x HDD back plane board header
 1 x IPMB connector
 1 x Clear CMOS jumper
Socket
Socket
Security
Security
Front I/O  1 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
Socket
Socket
Security
Security
Rear I/O  2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
Socket
Socket
Security
Security
Backplane I/O
(R182-N20)
 10 x 2.5" or 2.5" SATA/SAS/NVMe ports
 Bandwidth: SATA 6Gb/s or SAS 12Gb/s or PCIe Gen4 x4 per port
(R182-NA0)  10 x 2.5" SATA/SAS/NVMe hybrid ports
 Bandwidth: PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s per port
Socket
Socket
Security
Security
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010