Gigabyte R182-Z93 - Page 13

- 13 - Hardware Installation
Storage  10 x 2.5" Gen4 U.2 hot-swappable SSD bays
 1 x M.2 slot:
- M-key
- PCIe Gen4 x4
- Supports NGFF-2242/2260/2280/22110 cards
- CPU TDP is limited to 225W if using M.2 device
SAS N/A
Internal I/O  1 x M.2 slot
 1 x USB 3.0 header
 1 x COM header
 1 x TPM header
 1 x Front panel header
 1 x HDD back plane board header
 1 x PMBus connector
 1 x IPMB connector
 1 x Clear CMOS jumper
 1 x BIOS recovery jumper
Front I/O  1 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x NMI button
 1 x Reset button
 2 x LAN activity LEDs
 1 x HDD activity LED
 1 x System status LED
Rear I/O  2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
Backplane I/O  Backplane P/N: 9CBP10A5NR-00
 Speed and bandwidth:
 SAS 12Gb/s, SATA 6Gb/s, PCIe Gen4 x4
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010