System Hardware Installation - 34 -
3-11 Installing and Removing an M.2 Device
Follow these instructions to install an optional M.2 device:
1. Insert the M.2 device into the M.2 connector.
2. Press down on the M.2 device.
3. Secure the M.2 device to the motherboard with a single screw.
4. Reverse steps 1-3 to remove the M.2 device.
1
2
CAUTION:
The position of the stand-off screw will depend on the size of the M.2 device. The stand-off screw
is pre-installed for 22110 cards as standard. Refer to the size of the M.2 device and change the
position of the stand-off screw accordingly.
To Next Page
Loading...
