Gigabyte R272-Z30 - Page 106

- 106 - BIOS Setup
5-3-3-1-6 Phy Conguration
Parameter Description
Phy Conguration
PMU Training
Press [Enter] to congure PMU Training.

DFE Read Training
– Perform 2D Read Training with DFE on.
– Options available: Auto, Enable, Disable. Default setting is Auto.

FFE Write Training
– Perform 2D Write Training with FFE on.
– Options available: Auto, Enable, Disable. Default setting is Auto.

PMU Pattern Bits Controls
– Options available: Auto, Manual. Default setting is Auto.