Gigabyte R282-2O0 - Page 14

- 14 - Hardware Installation
Video R282-NO0/R282-2O0
 Integrated in Aspeed® AST2600
 2D Video Graphic Adapter with PCIe bus interface
 1920x1200@60Hz 32bpp, DDR4 SDRAM
R282-N80
 Integrated in Aspeed® AST2500
 2D Video Graphic Adapter with PCIe bus interface
 1920x1200@60Hz 32bpp, DDR4 SDRAM
Storage R282-2O0
 Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays
 Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays ( Connected via
SAS Expander)
 SAS card is required for SAS devices support
 Broadcom SAS35x36R expander
 Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
 Default conguration supports:
 Non-supported SATA/SAS drives without SAS card
 Suggested 12Gb/s SAS cards: CRA4448
R282-NO0
 24 x 2.5" Gen4 NVMe hot-swappable HDD/SSD bays
 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays in rear side
R282-N80
 Front side: 16 x 2.5" SATA/SAS ports, 8 x 2.5" SATA/SAS/Gen4 NVMe hybrid ports
 Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays ( Connected via
SAS Expander)
 SAS card is required for SAS devices support
 Broadcom SAS35x36R expander
 Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port
 Default conguration supports:
 8 x 2.5" NVMe drives, non-supported SATA/SAS drives without SAS card
 Suggested 12Gb/s SAS cards: CRA4448
SAS  Supported via add-on SAS Card