Gigabyte R282-G30 - Page 13

- 13 - Hardware Installation
Socket
Socket
Internal I/O  2 x CPU fan headers
 1 x USB 3.0 header
 1 x TPM header
 1 x VROC connector
 1 x Front panel header
 1 x HDD back plane board header
 1 x IPMB connector
 1 x Clear CMOS jumper
Socket
Socket
Front I/O  2 x USB 3.0
 1 x Power button with LED
 1 x ID button with LED
 1 x Reset button
 1 x NMI button
 1 x System status LED
 1 x HDD activity LED
 2 x LAN activity LEDs
Socket
Socket
Rear I/O  2 x USB 3.0
 1 x VGA
 2 x RJ45
 1 x MLAN
 1 x ID button with LED
Socket
Socket
Backplane I/O  Front side_CBP20C5: 8 x SATA/SAS and 4 x SATA/SAS/NVMe ports
 Bandwidth: PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s per port
Socket
Socket
TPM  1 x TPM header with SPI interface
 Optional TPM2.0 kit: CTM010