Gigabyte SkyVision WS100 - Page 5

English
-
5
-
Overview
1. Before You Begin
SkyVision WS100 transmitter (GT-WS100TX);
SkyVision WS100 receiver (GT-WS100RX);
HDMI connector: Connects to the HDMI port of the source device
Micro USB power connector: Connects to the USB port of the source
device with bundled USB cable.
Registration button: Registration button is reserved for receiver paring use.
LED indicator:
On: LED indicator is solid blue
Linking to SkyVision WS100 receiver: LED indicator is blinking
HDMI port: Connects to HDMI-ready TV or display with bundled HDMI cable
Micro USB power port: Connects to external power with bundled power adapter
Menu button: Setup menu
Up button: Scrolls up through the menu
Down button: Scrolls down through the menu
Power LED indicator:
Power on: LED indicator is solid white
Power off: LED indicator is off
Link LED indicator:
Linked: LED indicator is solid blue
Linking to SkyVision WS100 transmitter: LED indicator is blinking
1
1
2
2
3
3
4
4
5
6
7