Gigabyte SkyVision WS100 - Display Setting; Adjust Screen Resolution

English
-
9
-
Display Setting
Adjust Screen Resolution
SkyVision WS100 supports duplicate mode, extend mode, and projector
only mode on external display. Please follow the steps below to enable
external display.
SkyVision WS100 supports 1080p full HD video resolution without
latency (latency < 1ms). You can manually adjust preferred resolution by
the following steps.
1. Windows Utility
Step1. Press and tap P
Step2. Select Clone mode, Extend display, or Project out only
2. MAC OS
Step1. Click System Performance to open Displays
Step2. Click Detect Display to detect external display
1. Windows Utility
Adjust screen resolutions on both source device and external display
Note:
MAC OS will automatically detect external display and switch to a better resolution
when external display cable is plugged in.
Step1. Right click the mouse on Windows desktop
and choose Screen resolution
Step2. Dropdown the Resolution list and select
preferred resolution
Step3. Click Apply
Step4. Click Keep Change when con rmation
message pop out
Step5. Click OK
Step1. Press and tap P