Gigabyte Ultra Durable 3 - Chapter 4 Unique Features; Xpress Recovery2

Chapter4 Unique Features
4-| Xpress Recovery2
Xpress
Recovery?
is
a
utility
that
allows
you
to
quickly
compress
and
Ne?
back
up
your
system
data
and
perform
restoration
of
it.
Supporting
NTFS,
FAT32,
and
FAT16
file
systems,
Xpress
Recovery2
can
back
up
data
on
PATA
and
SATA
hard
drives
and
restore
it.
Before You Begin:
*
Xpress
Recovery2
will
check
the
first
physical
hard
drive???)
for
the
operating
system,
Xpress
Recovery2
can
only
back
up/restore
the
first
physical
hard
drive
that
has
the
operating
system
installed.
*
As
Xpress
Recovery2
will
save
the
backup
file
at
the
end
of
the
hard
drive,
make
sure
to
leave
enough
un-
allocated
space
in
advanced
(10
GB
or
more
is
recommended;
actual
size
requirements
vary,
depending
on
the
amount
of
data),
*
Itis
recommended
to
back
up
your
system
soon
after
the
operating
system
and
drivers
are
installed,
*
The
amount
of
data
and
hard
drive
access
speed
may
affect
the
speed
at
which
the
data
is
backed
up/
restored,
+ Ittakes longer to back up a hard drive than to restore it.
System Requirements:
"Atleast 512 MB of system memory
* VESA compatible graphics card
* Windows XP with SP1 or later, Windows Vista
*
Xpress
Recovery
and
Xpress
Recovery?
are
different
utilities,
For
example,
a
backup
file
created
ER
with
Xpress
Recovery
cannot
be
restored
using
Xpress
Recovery2.
+ USB hard drives are not supported.
* Hard drives in RAID/AHCI mode are not supported.
Installation and Configuration:
Turn on your system to boot from the Windows Vista setup disk.
A. Installing Windows Vista and Partitioning the Hard Drive
kng]
Gan
Wore uv nada
Step 1: Step 2:
Click Drive options. Click New.
(Note)
Xpress
Recovery2
checks
the
first
physical
hard
drive
in
the
following
sequence:
The
first
PATA
IDE.
connector,
the.
second
PATA
IDE
connector,
the
first
SATA
connector,
the
second
SATA
connector
and
so
forth,
For
example,
when
hard
drives
ate
attached
to
the
first
IDE
and
the
first
SATA
connectors,
the
hard
drive
on
the
first
IDE
connector
is
the
first
physical
drive.
When
hard
drives
are
attached
to
the
first
and
second
SATA.
connectors,
the
hard
drive
on
the
first
SATA
connector
is
the
first
physical
drive.
-61-
Unique
Features