Gigabyte Ultra Durable 3 - Updating the BIOS

B. Updating the BIOS
When
updating
the
BIOS,
choose
the
location
where
the
BIOS
file
is
saved.
The
following
procedure
as-
sumes
that
you
save
the
BIOS
file
to
a
USB
flash
drive.
Step 1:
1.
Insert
the
USB
flash
drive
containing
the
BIOS
file
into
the
computer,
In
the
main
menu
of
Q-Flash,
use
the
up
or
down
arrow
key
to
select
Update
BIOS
from
Drive
and
press
«Enter».
*
The
Save
Main
BIOS
to
Drive
option
allows
you
to
save
the
current
BIOS
file.
*
Q-Flash
only
supports
USB
flash
drive
or
hard
drives
using
FAT32/16/12
file
System.
*
Ifthe
BIOS
update
file
is
saved
to
a
hard
drive
in
RAID/AHCI
mode
or
a
hard
drive
attached
to
an
independent
IDE/SATA
controller,
use
the
«End»
key
during
the
POST
to
access
Q-Flash.
2, Select HDD 0-0 and press «Enter»,
Qash Utility v2.15
Winbond 25964BY 8M
O file(s) found. "
Flash Typo/Size.
3.
Selectthe
BIOS
update
file
and
press
«Enter».
AN
Make
sure
tho
BIOS
update
file
matches
your
motherboard
model.
Step 2:
The
process
of
the
syslem
reading
the
BIOS
file
from
the
USB
flash
drive
is
displayed
on
the
screen.
When
the
message
"Are
you
sure
to
update
BIOS?"
appears,
press
“Enter?
to
begin
the
BIOS
update.
The
monitor
Will display the update process.
*
Do
not
turn
off
or
restart
the
system
when
the
system
Is
reading/updating
the
BIOS.
AN
*
Do
not
remove
the
USB
flash
drive
or
hard
drive
when
the
system
is
updating
the
BIOS.
Step 3:
When
the
update
process
Is
complete,
press
any
key
to
return
to
the
main
menu,
Q-Flash
Utility
v2.15
Winbond 25Q64BV 8M
Flash Type/Size.
-65-
Unique
Features