& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control. (Default: CPU)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
& System 1 Fan Control Mode (SYS_FAN1 Connector)
Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control
mode. (Default)
Voltage Voltage mode is recommended for a 3-pin fan.
PWM PWM mode is recommended for a 4-pin fan.
& System 1 Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the system temperature. You
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
& Fan Speed Percentage
Allows you to control the fan speed. This item is congurable only when System FAN 1 Speed Control is
set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control. (Default: System 1)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
& System 2 Fan Control Mode (SYS_FAN2 Connector)
Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control
mode. (Default)
Voltage Voltage mode is recommended for a 3-pin fan.
PWM PWM mode is recommended for a 4-pin fan.
& System 2 Fan Speed Control
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the system temperature. You
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
& Fan Speed Percentage
Allows you to control the fan speed. This item is congurable only when System FAN 2 Speed Control is
set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control. (Default: System 2)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
& System_Fan3_PUMP Control Mode (SYS_FAN3_PUMP Connector)
Auto Lets the BIOS automatically detect the type of fan/pump installed and sets the optimal
control mode. (Default)
Voltage Voltage mode is recommended for a 3-pin fan.
PWM PWM mode is recommended for a 4-pin fan.
- 34 -
To Next Page
Loading...
