Gigabyte W480M VISION W - Page 31

& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control. (Default: System 1)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
& System 2 Fan Control Mode (SYS_FAN2A/SYS_FAN2B Connector)
Auto Lets the BIOS automatically detect the type of fan installed and sets the optimal control
mode. (Default)
Voltage Voltage mode is recommended for a 3-pin fan.
PWM PWM mode is recommended for a 4-pin fan.
& System 2 Fan Speed Control (SYS_FAN2A/SYS_FAN2B Connector)
Allows you to determine whether to enable the fan speed control function and adjust the fan speed.
Normal Allows the fan to run at different speeds according to the system temperature. You
can adjust the fan speed with System Information Viewer based on your system
requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
& Fan Speed Percentage
 Allowsyoutocontrolthefanspeed.ThisitemiscongurableonlywhenSystem 2 Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
& Fan Control Use Temperature Input
Allows you to select the reference temperature for fan speed control. (Default: System 1)
& Temperature Interval
Allows you to select the temperature interval for fan speed change. (Default: 1)
` Miscellaneous Settings
& Max Link Speed
Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation
modeissubjecttothehardwarespecicationofeachslot.AutoletstheBIOSautomaticallycongure
this setting. (Default: Auto)
& 3DMark01 Enhancement
Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)
- 31 -