Gigabyte X399 AORUS Gaming 7 - Page 43

BIOS Setup
- 43 -
& Downcore Control
Allows you to select the number of CPU cores to enable (the number of CPU cores may vary by CPU).
Auto lets the BIOS automatically congure this setting. (Default: Auto)
& Opcache Control
Enables or disables Opcache. Auto lets the BIOS automatically congure this setting. (Default: Auto)
& Extreme Memory Prole (X.M.P.)
(Note)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Prole1 Uses Prole 1 settings.
Prole2
(Note)
Uses Prole 2 settings.
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
The rst memory frequency value is the normal operating frequency of the memory being used; the second
is the memory frequency that is automatically adjusted according to the System Memory Multiplier settings.
(Note) This item is present only when you install a CPU and a memory module that support this feature.