Gigabyte X399 AORUS Gaming 7 - Page 45

BIOS Setup
- 45 -
& Memory Interleaving
Enables or disables memory bank interleaving. Enabled allows the system to simultaneously access
different banks of the memory to increase memory performance and stability. Options are: Auto (default),
None, Channel, Die, and Socket. Auto lets the BIOS automatically congure this setting.
& BankGroupSwap
Enables or disables Bank Group Swap. Auto lets the BIOS automatically congure this setting. (Default:
Auto)
& Gear Down Mode
Enables or disables memory Geardown mode. Auto lets the BIOS automatically congure this setting.
(Default: Auto)
& CLDO_VDDP Control
Allows you to determine whether to manually change the CLDO_VDDP voltage. Auto lets the BIOS
automatically congure this setting. (Default: Auto)
& CLDO_VDDP voltage
Allows you to manually change the CLDO_VDDP voltage. This item is congurable only when CLDO_VDDP
Control is set to Manual.
` Channel A/B/C/D Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
screens are congurable only when Memory Timing Mode is set to Manual or Advanced Manual. Note: Your
system may become unstable or fail to boot after you make changes on the memory timings. If this occurs,
please reset the board to default values by loading optimized defaults or clearing the CMOS values.