rating of 2A (12V) and maximum length of 2m.
Pin No.
1 12V
2 G
3
4 B
1
triangle on the plug) of the LED strip must be connected to Pin 1 (12V) of
this header. Incorrect connection may lead to the damage of the LED strip.
LED Strip
1
12V
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Intel
®
Chipset supports
Pin No.
1 GND
2 TXP
3 TXN
4 GND
5
6
7 GND
1
1
SATA3
5 3 1
4 2 0
7
7
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
- 14 -
To Next Page
Loading...
