Gigabyte Z370 HD3P - Page 33

& 
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Disabled)
& 
Enables or disables support for USB storage devices. (Default: Enabled)
& 
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default: Disabled)
& 
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
` 
& 
Enables or disables the integrated SATA controllers. (Default: Enabled)
& 
 
to AHCI mode.
 
   

Serial ATA features such as Native Command Queuing and hot plug. (Default)
& 
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Enabled)
& 
Enables or disables each SATA port. (Default: Enabled)
& 
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& 
Enables or disables support for external SATA devices.
& Mechanical Presence Switch
Allows you to determine whether to turn on the Mechanical Presence switch for the SATA device. This item
 is enabled. (Default: Enabled)
- 33 -