& Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
&
Enables or disables memory channel interleaving. allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
&
Enables or disables memory rank interleaving. allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
`
This sub-menu provides memory timing settings for each channel of memory. The respective timing setting
is set to Manual or Advanced Manual. Note:
Your system may become unstable or fail to boot after you make changes on the memory timings. If this
`
`
& CPU Vcore Loadline Calibration
the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS
`
This section provides CPU voltage control options.
`
This section provides Chipset voltage control options.
`
This section provides memory voltage control options.
` Internal VR Control
` PC Health Status
& Reset Case Open Status
Disabled Keeps or clears the record of previous chassis intrusion status. (Default)
Enabled Clears the record of previous chassis intrusion status and the Case Open
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
clear the chassis intrusion status record, set Reset Case Open Status to , save the settings to
the CMOS, and then restart your system.
- 26 -
To Next Page
Loading...
