& Other PCI devices
than the LAN, storage device, and graphics controllers.
CSM Support is set to .
& Administrator Password
<Enter>. You must enter the administrator password (or user password) at system startup and when entering
BIOS Setup. Differing from the user password, the administrator password allows you to make changes to
all BIOS settings.
& User Password
You must enter the administrator password (or user password) at system startup and when entering BIOS
Setup. However, the user password only allows you to make changes to certain BIOS settings but not all.
To cancel the password, press <Enter> on the password item and when requested for the password, enter
& Secure Boot
when CSM Support is set to Disabled.
- 31 -
To Next Page
Loading...
