Gigabyte Z590 GAMING X AX - Page 38

 Miscellaneous
& LEDs in System Power On State
 AllowsyoutoenableordisablemotherboardLEDlightingwhenthesystemison.
Off  Disablestheselectedlightingmodewhenthesystemison.
On  Enablestheselectedlightingmodewhenthesystemison.(Default)
& LEDs in Sleep, Hibernation, and Soft Off States
 AllowsyoutosetthelightingmodeofthemotherboardLEDsinsystemS3/S4/S5state.
 ThisitemiscongurablewhenLEDs in System Power On State is set to On.
Off  DisablestheselectedlightingmodewhenthesystementersS3/S4/S5state.(Default)
On Enables the selected lighting mode when the system enters S3/S4/S5 state.
& Intel Platform Trust Technology (PTT)
Enables or disables Intel
®
PTTTechnology.(Default:Disabled)
& 3DMark01 Enhancement
 Allowsyoutodeterminewhethertoenhancesomelegacybenchmarkperformance.(Default:Disabled)
& CPU PCIe Link Speed
Allows you to set the operation mode of the CPU-controlled PCI Express slots to Gen 1, Gen 2, Gen 3, or
Gen 4
(Note)
.Actualoperationmodeissubjecttothehardwarespecicationofeachslot.Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
& PCH PCIe Link Speed
Allows you to set the operation mode of the Chipset-controlled PCI Express slots to Gen 1, Gen 2, or
Gen3.Actualoperationmodeissubjecttothehardwarespecicationofeachslot.Auto lets the BIOS
automaticallycongurethissetting.(Default:Auto)
& VT-d
Enables or disables Intel
®
VirtualizationTechnologyforDirectedI/O.(Default:Enabled)
 Trusted Computing
Enables or disables Trusted Platform Module (TPM).
 PC Health Status
& Reset Case Open Status
Disabled  Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)
Enabled Clears the record of previous chassis intrusion status and the Case Openeldwill
show"No"atnextboot.
& Case Open
 DisplaysthedetectionstatusofthechassisintrusiondetectiondeviceattachedtothemotherboardCI
header.Ifthesystemchassiscoverisremoved,thiseldwillshow"Yes",otherwiseitwillshow"No".To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/CPU VCCSA/DRAM Channel A/B Voltage/+3.3V/+5V/+12V/CPU VAXG
 Displaysthecurrentsystemvoltages.
(Note) This item is present only when you install a CPU that supports this feature.
- 38 -