- 31 -
20) THB_C1/THB_C2 (Thunderbolt
™
Add-in Card Connectors)
The connectors are used to connect to a GIGABYTE Thunderbolt
™
add-in card.
Supports a Thunderbolt
™
add-in card.
1
1
THB_C2
THB_C1
21) CLR_CMOS (Clear CMOS Jumper)
Use this jumper to clear the BIOS conguration and reset the CMOS values to actory deaults. To clear
the CMOS values, use a metal object like a screwdriver to touch the two pins or a ew seconds.
• Always turn off your computer and unplug the power cord from the power outlet before clearing
the CMOS values.
• Ater system restart, go to BIOS Setup to load actory deaults (select Load Optimized Deaults) or
manually congure the BIOS settings (please navigate to the "BIOS Setup" page o GIGABYTE's
website for more information).
Open: Normal
Short: Clear CMOS Values
To Next Page
Loading...
