M ad e in Ge rm any
© Gigahertz Solutions GmbH
Auto-Power-Off:
This feature conserves energy and extends the total operating
time.
1. In case you have forgotten to turn OFF the HF analyzer or
it has been turned ON accidentally during transport, it will
shut off automatically after 40 minutes of continuous use.
2. If “LOW BATT” appears vertically between the digits in the
centre of the display, the HF analyzer will turn OFF after 2
to 3 min in order to avoid unreliable measurements. It re-
minds you to change the battery as soon as possible.
Shielding done by an expert is a depend-
able remedy
The effectiveness of shielding done by an experienced craftsman
can be verified by measurement. He has quite a number of options
at his disposal. There is no “best method”, however, befitting for all
problems – shielding always has to be adapted to the specific
situation.
Shielding, too, is covered comprehensively on our homepage
which also contains further links on this issue
Warranty
We provide a two year warranty on factory defects of the HF ana-
lyzer, the antenna and accessories.
Antenna
Even though the antenna appears to be rather delicate, it is made
of a highly durable FR4 base material that can easily withstand a
fall from table height.
HF Analyzer
The analyzer itself is not impact proof, due to the comparatively
heavy battery and the large number of wired components. Any
damage as a result of misuse is excluded from this warranty.
To Next Page
Loading...
Need help?
General
