GILBARCO VEEDER-ROOT Latitude LS-100 User Manual

Page 5-10 MDE-5422B Latitude™ Owner’s Manual · March 2021
Latitude Operation Setting Parameters
Setting Parameters
A parameter or option determines the settings selected for that function. A default option will
usually be programmed into the unit but these options can be modified as per the
requirements.
IMPORTANT INFORMATION
Note: Ensure that the dispenser is in the IDLE state and all the nozzles are in the boot. The
measurement system must be metric.
The keypad display has two modes:
•User Menu
• Command Code (CC)
Some parameters can be viewed and edited using the User Menu mode.
The remaining
parameters can be viewed and edited using the Command Code menu.
To enter any of the
modes, enter the 4-digit password (which is listed in keypad command levels and PINs
section) and then press ENTER.

GILBARCO VEEDER-ROOT Latitude LS-100 Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	Latitude LS-100
Category	Petrol Station Equipment
Language	English