GILBARCO VEEDER-ROOT Latitude LS-100 User Manual

MDE-5422B Latitude™ Owner’s Manual · March 2021 Page 5-15
Setting Parameters Latitude Operation
Parameter 20: Set PPU Values
Command code 20 is entered in Level 1 pr
ogramming to set or change the PPU values. The
following is the layout and description of the digit position for this programming feature:
Keypad: ENT
ER
Sale
2 0 Side
Volume
Grade Level
PPU
Price Price Price Price
Note: The second PPU level is not used and the value used for the parameter level is always 1
(only valid at self-sufficient).
The following is the sequence and displayed values for changing
the Side 2, grade 2 PPU:
Note: Ensure that the decimal points are configured (CC85 FC3 and CC85 FC4) before
setting the
PPU value. And, the value set for CC85 FC3 and CC85 FC4 must always be
the same. This implies that every time the user changes the value for CC85 FC3, they
need to set the value for CC85 FC4 as well.
Keypad: 20 - S
et PPU values command code.
Keypad: ENTER

GILBARCO VEEDER-ROOT Latitude LS-100 Specifications

General

Brand	GILBARCO VEEDER-ROOT
Model	Latitude LS-100
Category	Petrol Station Equipment
Language	English