Gilbarco PAM 5000 User Manual

3
Glossary of Abbreviations
 CPB- Central Processor Board
 CPU- Central Processing Unit
 DSB Module- Hardware Interface Module (HIM) for a connection via the Doms
Serial Bus port
 DSB port- Port with Doms Serial Bus hardware interface. DSB ports are
numbered 11,12,13,14,15 on the CPB board
 DMB Port- Port with Doms Multiplex Bus hardware interface. The DMB ports
are numbered 21 to 23 on the CPB board. The port can also be used as a DSB Port
by using a special DSMB cable
 DMB Module- DOMS Multiplex Hardware Interface Module
 Gilbarco PAM 5000- The latest interface system that replaces the PAM 1000
 HIM- Hardware Interface Module (DSB/DMB)
 LAN- Local Area Network
 PAM- Pump Access Module
 PORT- A physical serial communication port for connection to hardware
modules
 POS- Point of Sale
 PSU- Power Supply Unit
 Service Port- A communication port for connection of a service PC or laptop via
an RS-232 connection via null-modem cable wiring
 WAN- Wide Area Network
Manual References
 MDE- 4676 PAM 5000 Installation Manual
 MDE- 4677 PAM 5000 Service Manual
 MDE- 3802 Encore & Eclipse Site Prep Manual
 MDE-3804 Encore & Eclipse Start-up and Service Manual
 MDE-3893 Encore/Eclipse Owners Manual
 MDE- 4185 Encore/Eclipse CRIND BIOS Configuration Interface Manual
Tools Required for Installation
 Large Slotted Screwdriver
 Small (max 2.5.mm) Slotted Screwdriver
 Drill & Fasteners (to secure PAM 5000 to wall)

Gilbarco PAM 5000 Specifications

General

Brand	Gilbarco
Model	PAM 5000
Category	Controller
Language	English