2-1
Description 2
The following chapter describes the mechanics and hydraulics of the Dilutor-Dispenser.
Two models of 402 Dilutor-Dispenser are available: Single-syringe and Dual-syringe.
Each model comes with a keypad, a probe, and accessories. You order and fit the
syringe(s), from those described on page 2-6, most suited to your application.
Your 402 is delivered with the appropriate modules fitted. If later, you decide to
convert a Single-syringe model into a Dual-syringe model, you must order and fit a
Tee-junction module to the right-hand side of your dilutor; the left-hand always
contains a Valve module.
To Next Page
Loading...