Double clicks on the time button to switch the time
display between 12 or 24 hours format
Press and hold down the alarm 1 button to access the to alarm
1 setting then the alarm hour numbers will flash; press +/- to adjust
the preferred alarm hour and press alarm 1 button to confirm; then
the minute numbers will flash; press +/- to adjust the preferred alarm
minute and press the alarm 1 button to confirm and exit the
setting. (Repeat the same for alarm 2 setting)
Double-clicks on the light button to turn on/off the ambient/night
light function. When the product is flipped over for light mode use,
pressing and holding down the buttons +/- can adjust the brightness
of the light. (+ to increase the light intensity and - to decrease the
light intensity)
Press and hold down button until a beep to access to the time
setting mode and the Hour numbers will start flashing; Press buttons
+/- to adjust your prefer hour numbers then press button to
confirm; the minute numbers will start flashing and repeat the above
operation to set your preferred minute numbers. Press button to
confirm and exit the time setting.
Operating Instructions
A beep will be responded to any successful double-clicks or long&hold down pressing
1. Production Activation and Charging
2. Time Setting
3. Switch 12/24 Display
4. View current alarm time / turn on or off the current alarm
5. Alarm Setting
6. Screen Light Setting
7. Ambient/Night Light Setting
8. Ambient/Light Light Flip Function
Micro USB
Charging
This is a power activation product and powered by a 1200mAh
integrated rechargeable battery. It can only be turned on when you
charge it first. Please fully charge it first before use by connecting the
supplied USB charging lead to any USB port such as a USB phone
charger or any computer/laptop USB port; When the battery life icon
is flashing on the screen, you may need to charge it as soon as
possible.
Single click on the alarm 1 button to view the current alarm 1 time
set, double clicks to turn alarm 1 on/off; when turned on, the alarm 1
icon will display on the screen; when turned off, the icon will
Disappear (Repeat the same operation above for alarm 2)
The screen light will automatically turn on between 9pm to 7am
You can adjust the brightness of the screen light by pressing +/-
buttons when the product is in clock mode use(when it’s not flipped
over for light mode use) The screen light can be completely turn off
by pressing and holding the - button; to turn it back on, press + button.
The flip function to turn off or turn on the light only works when the light
function has been turned on. To turn it on, double clicks on the light
button and the light icon will display on the screen. To turn off the
light function, double clicks on the same button again.
9. Snooze Feature Introduction
When the alarm goes off, simply shake it to snooze for 5 minutes or press any button or flip it
over to turn it off for the day. You can snooze it as many times as you wish during the beeps
but the beep only lasts for 3 minutes, then it will stop.
8
Gingko Electronics Ltd
Unit C27 Holly Farm Business Park, Kenilworth,United Kingdom, CV8 1NP
www.ging-ko.co.uk
info@ging-ko.co.uk
Printed in China
The Edge Light Alarm Clock is a design patented product from
Gingko Electronics Ltd in the UK and ‘the Edge’ is a registered trade mark
of Gingko Electronics Ltd
El reloj despertador Edge Light es un producto patentado de diseño de
Gingko Electronics Ltd en el Reino Unido y 'the Edge' es una marca registrada
de Gingko Electronics Ltd
Der Edge Light Wecker ist ein Design patentiertes Produkt von
Gingko Electronics Ltd im Vereinigten Königreich und "The Edge" ist eine eingetragene Marke
von Gingko Electronics Ltd
The Edge Light Alarm Clock è un prodotto brevettato dal design
Gingko Electronics Ltd nel Regno Unito e 'the Edge' è un marchio registrato
di Gingko Electronics Ltd
De Edge Light Alarm Clock is een gepatenteerd designproduct van
Gingko Electronics Ltd in het VK en 'the Edge' is een geregistreerd handelsmerk
van Gingko Electronics Ltd
Le réveil Edge Light est un produit breveté de conception de
Gingko Electronics Ltd au Royaume-Uni et «The Edge» est une marque déposée
de Gingko Electronics Ltd
I
I
I
I
~
I
I
I
01
I
I
¢1
[QJ
I
I
I
I
I
~
I
I
I
I
~
I
I
e>
I
I
~
e>
I
I
I
I
I
Ei]
E')
I
I
I
I
I
~
I
I
I
I
~
cu
I
I
I
I
I
I
I
I
To Previous Page
Loading...