Ginnys 757147 - How To Operate; Brewing Coffee; Setting The Timer For Delay Brewing

HOW TO OPERATE
7
Facebook.com/GinnysBrand
BREWING COFFEE
1. Fill the carafe with 12 cups of cold water and pour into the water
reservoir.
2. Make sure the basket and coee lter are properly seated under the
coee lid and the handle on the basket is down.
Ne: A paper cone lter #4 may also be used in place of the
permanent lter.
3. Follow the coee manufacturer’s recommended serving size and add
coee to the coee lter for each cup desired, increasing or decreasing
to suit individual taste.
4. Press ON/OFF. The ON/OFF red light will illuminate. The brew cycle will
begin.
5. Aer the cycle is complete, the coee maker will keep coee warm for
2 hours then will automacally shut o.
SETTING THE TIMER FOR DELAY BREWING
1. The clock must be set for the programming funcon to work.
2. Touch PROG twice unl the display shows TIMER.
3. Use HOUR and MIN buons to set the desired brewing me.
4. Touch ON/OFF twice. The blue light behind PROG will illuminate.
5. Brewing will begin at the pre-set me. The ON/OFF red light will
illuminate when brewing begins and the blue light behind PROG will go
out.
6. Aer the cycle is complete, the coeemaker will keep coee warm for
2 hours then will automacally shut o.