Gioteck EX-01 - Reversing the Earhook; Prying Faceplate; Unhooking Earhook; Removing Earhook

06 | REVERSING EARHOOK REVERSING EARHOOK | 07
reversing the earhook
The EX-01 ships with two earhooks, each marked [L] for the left ear and [R] for the right ear.
After selecting the appropriate earhook, follow the instructions below:
Using your
fingernail,
carefully pry
open the shiny
faceplate from
the back of the
headset upwards
and forwards.
REAR HOOKS
Once clear of the
body, unhook from
the front hook.
Lift clear
from the body.
Noting the 4
earhook pins,
gently pull away
the existing
earhook and
store safely.
Line-up the
earhook holes
with the pins
and gently
guide the
replacement
earhook over
the top until
set in position.
Hook the front
faceplate hook
into the front
hook slot, then
slowly push the
rear hooks
into place.
FRONT HOOK
FRONT HOOK
EARHOOK
PINS
EARHOOK
HOLES