Gioteck EX-02 - Reversing the Earhook; Earhook Reversal Procedure

06 | REVERSING EARHOOK REVERSING EARHOOK | 07
reversing the earhook
The EX-02 ships with two earhooks, each marked [L] for the left ear and [R] for the right ear.
After selecting the appropriate earhook, follow the instructions below:
EARHOOK HOLESEARHOOK PINS
Move the switch
to the right to
release the shiny
faceplate.
Using your
fingernail,
carefully pry open
the faceplate
from the back of
the headset
upwards and
forwards.
Lift clear
from the body.
Noting the 4
earhook pins,
gently pull away
the existing
earhook, and
store safely.
Line-up the
earhook holes
with the pins and
gently guide the
replacement
earhook over the
top until set in
position.
Hook the front
faceplate hook
into the front
hook slot, and
then slowly push
the rear hooks
into place.