To Next PageTo Next Page
Need help?Do you have a question about the GIRBAU RMS610 and is the answer not in the manual?
Explains symbols found on the machine's labeling for hazard identification.
Explains symbols used within the manual for warnings and notes.
Provides notes regarding the translation of the original manual.
Defines the machine's purpose and limitations for fabric treatment.
Details the physical design and features of the washers.
Lists safety features, guards, and control components.
Explains built-in safety mechanisms like level, temp, and unbalance control.
Describes the microprocessor control system and its capabilities.
Covers selecting and executing wash programs.
Covers modifying programs, parameters, and settings.
Details the machine's control panel layout and buttons for different models.
Instructions on how to properly load laundry into the machine.
Guidance on using the detergent and softener dispenser.
Step-by-step instructions for starting a wash program.
Explains the door locking mechanism and safety delay.
Details the default wash programs and their settings for different models.
Explains how the machine manages load unbalance during the spin cycle.
Describes different ways to stop or interrupt a wash program, including door opening and STOP key functions.
Steps to enter the advanced mode for configuration and parameter adjustments.
Defines the master program structure and phases for customization.
Shows the default configurations of the wash programs across different models.
Explains the different phases that make up a wash program.
Details the parameters and options available for configuring each program phase.
Step-by-step guide to modifying existing wash programs.
Instructions for modifying operational parameters of the machine.
How to set or change the price for individual wash programs.
How to set program prices based on time of day and day of week.
Procedure to set the system clock and calendar.
Defines time bands and rates for different days of the week.
Assigns program prices based on defined time bands and rates.
Procedure to follow if a person or animal is trapped inside the washer.
Steps for manually releasing the door's safety lock.
Instructions for safely disassembling the washing machine door.
Solutions for common operating problems like unbalance, leaks, or forgotten codes.
Explains various alarm messages and their corresponding causes and responses.
Instructions for cleaning the exterior of the washing machine.
Guidance on cleaning the door seal to remove debris.
Steps for cleaning solenoid valve filters.
Procedures for verifying the proper function of safety devices like the door lock.
Instructions for cleaning the detergent dispenser, including front and top dispenser types.
Steps for cleaning the washing machine's drain pump.
How to check bearing housing seals for leaks.
Information on periodic overall maintenance checks.
General
