GIRBAU X20125 User Manual

Code no. 550038
Rev. no. 16/1018
Model
From Machine No.
PB32
PB/PBP51
X13
X20
2,175,001
2,190,001
2,205,001
2,210,001
Installation, Operation and
Maintenance Instruction manual for
Flatwork Ironer
GIRBAU, SA
Crta de Manlleu, km. 1
08500 VIC (Barcelona)  SPAIN
National sales:
Tel. (+ 34) 902 300 359
comercial@girbau.es
International sales:
Tel. (+ 34) 938 862 219
sales@girbau.es
Service:
Tel. (+ 34) 902 300 357
sat@girbau.es
www.girbau.es
For USA & CANADA:
CONTINENTAL GIRBAU Inc.
2500 State Road 44
WI 54904 Oshkosh  USA
Tel. 1(920) 231-8222
info@continentalgirbau.com
www.continentalgirbau.com
EN
PB32
PB/PBP51
X13***W
X20***W/F

GIRBAU X20125 Specifications

General

Brand	GIRBAU
Model	X20125
Category	Iron
Language	English

Summary

Safety Instructions

Important Safety Instructions

Essential precautions for safe operation and handling.

Transport, Installation, Inspection, Maintenance, Repair Routines

Covers key procedures for equipment handling and upkeep.

General Description of the Machine

Protection, Safety, and Control Elements

Identification and function of safety mechanisms and controls.

Technical and Connection Data

Electrical Connection Data and Protection Devices

Details on electrical wiring, supply, and protection requirements.

Exhaust Ducting Technical Details

Wiring Diagrams for Machine Models

Visual representation of electrical connections for different models.

Machine Connection Instructions

Electrical Requirements and Connection

Procedures and requirements for connecting the machine electrically.

Gas Connection Procedures

Steam Connection Procedures

Exhaust Ducting Connection

Initial Start-up Procedures

Initial Checks Before Operation

Checklist of essential checks before powering on the machine.

Gas Heating: Gas Pressure Control

Operating and Use: Inteli Control System

Stop Modes and Emergency Procedures

Details on stopping the machine and emergency stop functions.

Executing an Ironing Program

Operating and Use: Logi Control System

Stop Modes and Emergency Operation

Procedures for stopping the machine and emergency actions.

Executing and Modifying Ironing Programs

Personal Protection Wear

Essential Safety Gear and Precautions

Guidelines on required personal protective equipment and safety practices.

Releasing Trapped Persons or Items

Procedure for PB32, X13 Models

Steps to free a trapped person or item on PB32, X13 models.

Procedure for PB/PBP51, X20 Models

Steps to free a trapped person or item on PB/PBP51, X20 models.

Machine Alarms and Troubleshooting

List of Main Alarms and Procedures

Comprehensive list of common alarms and their resolution steps.

Machine Maintenance Procedures

Checking Safety Mechanisms

Possible Operational Anomalies and Solutions