Need help?Do you have a question about the GivEnergy 3600HY and is the answer not in the manual?
General| Model | 3600HY |
|---|---|
| Rated Power | 3600 W |
| Nominal AC Power | 3600 W |
| Max. DC Voltage | 550V |
| Number of MPPTs | 2 |
| Max PV Input Power | 5000 W |
| Max. Input Current per MPPT | 11 A |
| Output Voltage | 230 V |
| Frequency | 50/60Hz |
| Efficiency | 97.6% |
| Battery Voltage | 48 V |
| Max. Charge/Discharge Current | 75 A |
| Protection Degree | IP65 |
| Max. AC Power | 3600W |
| Max. DC Power | 5000W |
| MPPT Range | 150V-425V |
| Max. Charge/Discharge Power | 3600 W |
| Operating Temperature Range | -25°C to 60°C |
| Communication | RS485, WiFi, CAN |
Defines the manual's scope, intended users, and includes a safety caution.
Provides guidelines for storing manuals and directs users to additional information sources.
Explains the significance of DANGER, WARNING, CAUTION, and NOTE symbols used in the document.
Details the symbols found on the product and their corresponding meanings for safe operation.
Covers critical safety aspects including lethal voltages, burn hazards from hot parts, and radiation effects.
Addresses discharge currents, grounding requirements, breaker specifications, and necessary personnel qualifications.
Presents the inverter's physical layout and explains its bidirectional operation and energy flow management.
Provides instructions for storing the inverter in a suitable environment to maintain its condition.
Guides users on inspecting the packaging and contents upon delivery for any damage or missing items.
Highlights critical safety warnings for installation, including fire, explosion, burn hazards, and electrical shock.
Offers guidance on choosing a suitable environment, mounting height, and avoiding flammable materials for installation.
Advises against direct sunlight and water exposure, and specifies minimum clearances for proper operation.
Details ambient dimensions and spacing requirements for single and series inverter installations to ensure adequate cooling.
Provides step-by-step instructions for attaching the mounting bracket to the inverter.
Details the process for safely hanging and securing the inverter onto the mounted bracket on the wall.
Outlines checks to confirm the inverter is securely mounted and the supporting wall is stable.
Introduces the procedures and safety guidelines for making electrical connections to the inverter.
Illustrates the overall system configuration, showing connections between various components.
Describes the function of system components and provides important notes regarding cable usage.
Provides detailed instructions for connecting the inverter to the AC utility grid.
Specifies requirements for AC disconnection units and recommended cable sizing for output.
Offers safety warnings and guidance for making electrical connections to the PV panels.
Explains the inverter's PV input ports and how to configure MPPT channels.
Presents best practices and suggestions for connecting PV module strings.
Details critical limits for PV string voltage, current, and rules for correct polarity connections.
Specifies the required cross-sectional area and AWG for PV cables.
Provides instructions for connecting the battery, including safety measures and cable specifications.
Presents a step-by-step guide for safely and correctly connecting the battery to the inverter.
Explains the procedure for connecting the load monitoring module to the inverter.
Details the installation direction for the CT and the wiring for the load monitor.
Describes how to set inverter parameters, such as battery settings and charging times, using the WIFI app.
Details the use of WIFI as the standard wireless communication method for the inverter.
Explains the DRM0 function, which is provided for SAA certification purposes.
Outlines the sequential steps required to safely start up the inverter.
Details the steps for safely shutting down and disconnecting the inverter.
Guidance on checking heat dissipation and cleaning the inverter's exterior.
Instructions for checking the DC switch for damage and performing annual contact cleaning.
Provides instructions for safely dismantling the inverter from its mounting.
Guides on how to pack and store the inverter appropriately.
Provides instructions for the environmentally sound disposal of the inverter.
Describes the four main operating modes of the inverter.
Details the 5-year warranty and the process for registration.
Provides technical data related to the inverter's DC input parameters.
Lists the technical specifications pertaining to the inverter's AC output.
Details the technical specifications concerning the battery compatibility and performance.
Covers backup output capabilities, efficiency ratings, and a list of protection devices.
Includes physical dimensions, weight, operating temperature range, and noise emission levels.
Specifies the IP rating, connection types, display information, and available interfaces.
Lists approved certifications and provides contact details for technical support.
To Next Page
