GLD Products ElectronX Dartboard
Item 42-1054
13 1-800-225-7593
www.gldproducts.com
DARTBOARD FUNCTIONS
1
7
8
6
5
4
3
2
1. POWER switch/button - Located on the lower right corner on the side of the dartboard.
Be sure the AC Adapter is plugged into the jack on the bottom of the dartboard or
batteries are installed. Press the POWER switch to turn game on or off.
2. START/NEXT PLAYER button - This multi-function button is used to:
• START the game when all options have been selected.
• Put dartboard in Hold status between rounds to allow player to remove darts from
the target area.
• Enable the next player.
3. GAME GUARD button - After the START button has been pressed and play has begun,
the Game Guard feature can be activated. When the button is pressed, all of the keys
will ‘lock’. When Game Guard is active, a misguided dart hitting a button will not affect
your game. To deactivate the Game Guard, simply press the button again and the keys
will unlock.
4. BOUNCE OUT button - Decide before play if you want to count darts that do not
remain in board (“bounce-outs”) or not. If not, simply press the BOUNCE OUT button
immediately after a bounce out occurs to deduct the score that registers.
5. DART-OUT/SCORE button - The Dart-Out feature is active only during the “01” games
(301, 401, etc.). When a player’s score falls below 160, he/she can press the DART
OUT button to get a suggestion from the dartboard as to the 3 darts needed to ! nish
the game. Note: doubles and triples are indicated with 2 and 3 dashes to the left of the
number respectively. The SCORE feature allows player to access scores not currently
on display.
6. SOUND button - Sound level adjustable from 0-7 levels (8 levels).
7. DOUBLE/MISS button - This button is used to activate the Double In/Double Out and
Master Out options. The Miss feature is active during play of any game. Press button to
register a “missed” dart. The player can press this button when a dart lands outside target
area so computer registers a thrown dart.
8. PLAYER/PAGE button – This button is used at the start of each game to select the
number of players you want to play the game. In addition, this button allows players to
see other player scores not on the active display.
To Next Page
Loading...
