GLD Products ElectronX - Power Connection and Throwing Line

GLD Products ElectronX Dartboard
Item 42-1054
81-800-225-7593
www.gldproducts.com
POWER INSTALLATION
The dartboard is designed to be powered by an AC adapter. To connect the adapter, plug
the DC plug into the DC power jack on the dartboard and the AC plug into an electrical
outlet.
1. The board is not intended for children under the age of 12 years old.
2. The board must only be used with the recommended transformer.
3. The transformer is not a toy.
4. Disconnect the dartboard from the transformer before cleaning.
PROTECTIVE FILM
This electronic dartboard may have a clear protective ! lm over the entire display and button
area to prevent scratching during shipping. It is recommended that you remove this ! lm for
easier reading of the display. To remove, simply lift edge, peel off and discard.
WARNING: Not for use by children without adult supervision.
Darts are not toys and may cause injury if used
improperly. Everyone must stand behind the dart
thrower.