29
Section 10.
Transfer In/ Out of your power chair.
The Glide Rehabilitation Products Power Chair is designed in such a way that
transferring in and out can be done with a minimum of fuss.
1. Make sure that your chair is turned off before transferring.
2. Ensure your wheelchair attendant brakes are applied.
3. Armrests can flip back allowing easy lateral movement from either side of
chair or for the fitting of a patient hoist sling.
4. If occupant is ambulant, or able to do standing transfers, removing swing away
footplates will allow better placement of feet when standing or conversely,
closer access to seat when transferring into chair. Where possible have
someone assist you during the transfer.
5. You will need to learn safe transfer techniques from your Health Professional.
6. Always have wheelchair as close as possible to chair that you are transferring
to.
7. Ensure that the front castors are facing forward when transferring.
8. If your chair is fitted with Power Operated Seat Tilt or Recline functions,
ensure that they are in the down and upright position before attempting to
transfer.
To Next Page
Loading...
