EasyManua.ls Logo

Glide CentroGlide - Page 61

Glide CentroGlide
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Positioning the occupant restraint when using the Dahl Docking
systems only
Warning
When using wheelchair with Dahl Docking systems, the floor anchorage points for the
occupant restraint system shall be located 10-60mm outside the wheels, on each side.
The peliv belt must be worn low across the front of the pelvis so that the angle of the
pelvic belt is within the optional or preferred zone of 30° to 75° as showen. A steeper
(greater) anle within the preferred zone, 45° to 75° is desirable. i.e. closer to, but never
exceeding 75°

Related product manuals