FUSELAGE (Karman openings)
We suggest to cover the fuselage (Karman site) with Paper-Tape (to
avoid scratch and glue dirty)
Fuselage – wing servos connectors
Mark the position of the connector in each size of the fuse.
Open the windows (with Dremel blade) – we use MULTIPLEX GREEN
CONNECTOR ( MPX 6 pins – female).
Cut the extension cable (Karman – Receiver) an solder it to the MPX
Connector.
Use the schrink tube to cover the connection.
Every Servo needs 3 pins; mark your scheme
Now you can glue the MPX (female) Connector to the fuselage.
To Next Page
Loading...